AP20T15GP-HF advanced power n-channel enhancement mode electronics corp. power mosfet simple drive requirement bv dss 150v lower on-resistance r ds(on) 70m ? fast switching characteristic i d 22.2a halogen free & rohs compliant product description absolute maximum ratings symbol units v ds v v gs v i d @t c =25 a i d @t c =100 a i dm a p d @t c =25 w p d @t a =25 w t stg t j symbol value units rthj-c maximum thermal resistance, junction-case 1.4 /w rthj-a 62 /w data and specifications subject to change without notice thermal data parameter storage temperature range total power dissipation 89.2 -55 to 150 operating junction temperature range -55 to 150 total power dissipation 2 continuous drain current, v gs @ 10v 14 pulsed drain current 1 60 150 gate-source voltage + 20 continuous drain current, v gs @ 10v 22.2 maximum thermal resistance, junction-ambient halogen-free product 201303122 1 parameter rating drain-source voltage g d s a p20t15 series are from advanced power innovated design and silicon process technology to achieve the lowest possible on- resistance and fast switching performance. it provides the designe r with an extreme efficient device for use in a wide range of powe r applications. the to-220 package is widely preferred for all commercial-industrial through hole applications. the low thermal resistance and lo w package cost contribute to the worldwide popular package. g d s to-220(p)
electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =250ua 150 - - v r ds(on) static drain-source on-resistance 2 v gs =10v, i d =15a - - 70 m v gs =4.5v, i d =10a - - 120 m v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =15a - 21 - s i dss drain-source leakage current v ds =120v, v gs =0v - - 25 ua i gss gate-source leakage v gs =+ 20v, v ds =0v - - + 100 na q g total gate charge i d =15a - 48 77 nc q gs gate-source charge v ds =120v - 7.5 - nc q gd gate-drain ("miller") charge v gs =4.5v - 18 - nc t d(on) turn-on delay time v ds =75v - 12 - ns t r rise time i d =15a - 30 - ns t d(off) turn-off delay time r g =3.3 ? -33- ns t f fall time v gs =10v - 40 - ns c iss input capacitance v gs =0v - 2100 3360 pf c oss output capacitance v ds =25v - 125 - pf c rss reverse transfer capacitance f=1.0mhz - 100 - pf r g gate resistance f=1.0mhz - 1.7 3.4 source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =15a, v gs =0v - - 1.3 v t rr reverse recovery time i s =10a, v gs =0v - 40 - ns q rr reverse recovery charge di/dt=100a/s - 80 - nc notes: 1.pulse width limited by max. junction temperature. 2.pulse test this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. apec does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 2 AP20T15GP-HF
a p20t15gp-hf fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 0 10 20 30 40 50 60 048121620 v ds , drain-to-source voltage (v) i d , drain current (a) t c =25 o c 10v 7.0v 6.0v 5.0v v g = 4.0v 0 10 20 30 024681012 v ds , drain-to-source voltage (v) i d , drain current (a) t c = 150 o c 10v 7.0v 6.0v 5.0v v g = 4.0v 0.0 0.8 1.6 2.4 3.2 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) i d =15a v g =10v 0 4 8 12 16 20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =150 o c 50 60 70 80 90 246810 v gs gate-to-source voltage (v) r ds(on) (m ) i d =10a t c =25 o c 0.0 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 t j , junction temperature ( o c) normalized v gs(th) i d =250ua
AP20T15GP-HF fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. maximum continuous drain fig 12. gate charge waveform current v.s. case temperature 4 0 2 4 6 8 10 12 0 102030405060 q g , total gate charge (nc) v gs , gate to source voltage (v) i d =15a v ds =120v 0 800 1600 2400 3200 1 5 9 13 17 21 25 29 v ds ,drain-to-source voltage (v) c (pf) f =1.0mh z c iss c oss c rss 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 10 t , pulse width (s) normalized thermal response (r thjc ) p dm duty factor = t/t peak t j = p dm x r thjc + t c t t 0.02 0.01 0.05 0.1 0.2 duty factor=0.5 single pulse 0.1 1 10 100 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) i d (a) t c =25 o c s in g le puls e 100us 1ms 10ms 100ms dc operation in this area limited by r ds(on) 0 8 16 24 32 25 50 75 100 125 150 t c , case temperature ( o c ) i d , drain current (a) q v g 10v q gs q gd q g charge
|
